The collection of consumption data allows optimizing the energy management of buildings.
Device for monitoring electrical consumption. It is installed in the company counter (it must be a digital counter with optical output).
RS232 and USB output.
It allows to monitor the electrical consumption of buildings to improve their energy management.
Three-phase electrical network analyser ready to be installed on DIN rail. It captures instant, maximum and minimum data.
Different models according to THE data output RS485, LonWorks, Ethernet ...
It facilitates the improvement of the energy management of buildings. It allows visualizing the CO2 emissions linked to the energy consumption in the building.
Electric network analyser that facilitates the reading of data due to its large screen. The device visualizes PHASE-PHASE, PHASE-NEUTRAL, current, frequency and an active, apparent, capacitive, reactive and inductive power, Cos_PHI, instantaneous parameters as well as costs and emissions of KgCO2 derived from the consumption of the active energy.
It facilitates the energy management of buildings.
It is a device for the combined charging of water, air, gas, electricity and steam. Accessible via web. It is possible to register and deliver the readings from a large number of counters.
It facilitates the energy management of the building.
Specific controller-thermostat for the control of heaters units or heat pumps. It allows replacing the thermostats and, by including a humidity and presence sensor, it eases the optimization of the climatic conditions of the room. It can also be complemented with window or door contactors to turn off the air conditioning system when they open.
Designed to be installed in hotels, offices, hospitals, schools and shops.
The frame and the software interface can be adapted to not confront the aesthetics of the room or office.
It facilitates the energy management of buildings.
Hardware and software set that uses open protocols to facilitate the integration between different measuring devices. Customizable user interface with schedules, alarms, trends and reports. It allows the management of energy consumption and control of climate and lighting systems.
Integrated energy management system.
It facilitates the energy management of buildings.
Temperature, humidity and brightness sensor that works for ZigBee and is powered by batteries.
Wireless monitoring of temperature, humidity and luminosity.
It allows optimizing the energy management at home.
The energy manager EnviR is designed to observe easily the power consumption on real time. It is also possible to see a graph with the consumption of the morning, afternoon and night, the time and the ambient temperature.
Single-phase and three-phase.