They stand out for its compact design and its high performance.
It is made of an «Inverter» external unit connected to the inner module through refrigerating connections. The inner module isfully equipped including: - A control panel with programmable regulation depending on the outdoor temperature, which communicates with the outside group and which, depending on the connected options, allows managing a direct heating circuit, a circuit with mixer valve and one or two circuits for the production of hot sanitary water. The bus connection system allows controlling the installation of the boiler and the Platinum BC MAX cascade. - High efficiency A class circulator - Plate exchanger. - Expansion vase and safety valve. - Buffer tank of 40 liters. - Electrical input through electric heating resistance of 4, 8 and 12 kW.
Heating, cooling and ACS installations.
Platinum BC Max 22 kW - Ref.: 144107006 and Platinum BC Max 27 kW - Ref.: 144107007.
Renewable product. CE marking.
Working range in heat pump mode with air temperature between -5ºC and 42ºC. Double anode, one active PROTECH that does not need maintenance and one of magnesium. Ecological gas R134A that allows reaching a water temperature up to 62 ° C in heat pump mode. Condenser outside the tank (not in direct contact with the water).
To replace an electrical thermo or a gas heater without making major changes to the installation: it reduces the energy consumption and revaluates the house. In a new home, as a complement to a solar thermal installation or to justify a reduction in the minimum solar contribution.
At ground level. Available in 200 and 250 liters.
Renewable product. CE marking.
Working range in heat pump mode with air temperature between -5ºC and 42ºC. Double anode, one active PROTECH that does not need maintenance and one of magnesium. Ecological R134A gas that allows reaching a water temperature up to 62°C in heat pump mode. Condenser outside the tank (not in direct contact with the water). SILENT function reduces the sound impact to a minimum. LCD display. Functions: GREEN, AUTO, BOOST, BOOST 2, time schedule, VOYAGE and anti-legionella.
To replace an electrical thermo or a gas heater without making major changes to the installation: it reduces the energy consumption and revaluates the house. In a new home, as a complement to a solar thermal installation or to justify a reduction in the minimum solar contribution.
Wall. Available in 80 and 100 liters.
Renewable product. CE marking.
Working range in heat pump mode with air temperature between 10 and 40 ºC. Ecological gas R134A that allows reaching a water temperature up to 55 ° in heat pump mode. Condenser outside the tank (not in direct contact with the water). Titanium vitrified steel boiler. Integrated support resistance. Anti-corrosion protection with magnesium anode. Digital display. Functions: Green, Auto, Boost, Time schedule and anti-legionella.
To replace an electrical thermo or a gas heater without making major changes to the installation: it reduces the energy consumption and revaluates the house. In a new home, as a complement to a solar thermal installation or to justify a reduction in the minimum solar contribution. Warm areas or when the heat pump takes the air from the interior.
Wall mount. Available in 80 and 100 liters.
It reduces the water consumption.
It is a porcelain toilet with dual output. Measurements: 370 mm length, 685 mm width and 810 mm height. Attached to the wall. Square shaped. Flushing system: drag. Type of installation: standing.
Possibility to choose the following colour: white, pergamon, edelweiss, graffiti and jasmine.
It reduces the water consumption.
Finish: Chromed Flow (l/min to 3 bar): 8 Automatic drainage. Flexible power supply included Water and energy saving system CLICK®. Type of aerator: Integrated. Cartridge type: Ceramic. Type of installation: Shelf.
Bathroom, shower, bidet.
Automatic drain, click-clack drain, high pipe, smooth structure, integrated lateral handle, recessed, battery powered, network connection, automatic inverter, articulated support.
It reduces the water consumption.
Finish: Chromed. Flow (l/min to 3 bar): 6.5. Opened pipe. Automatic drainage. Flexible power supply included. Areator type: cascade. Automatic drainage. Flexible power links included. Type of aerator: Integrated. Cartridge type: Ceramic. Type of installation: Shelf.
Washbasin, shower.
High spout, progressive technology, joystick and recessef for showers.
It reduces the water consumption.
Finish: Chromed. Flow (l/min to 3 bar): 6.5. Automatic drainage. Flexible power supply included. Limit flow sensor. Installation type: Shelf.
Bathroom, shower, bidet
Flow limiter at 8l/min, automatic drainage, recessed, central spout, recessed 1/2 bath-shower, automatic inverter, deflector-flow regulator, integrated shower support.
It has the label "Guarantee of Environmental Quality" and an own label "ECO" because of its high water saving.
Sprayer with chromed brass body with trim. Flow rate: 8 l/min with automatic regulator. Male inlet ½ ". Thickness according to the needs.
It reduce up to a 50% of the water consumption by achieving the desired temperature in a very short time.
Tap with two completely different controls: one to regulate the flow rate and the other to regulate the temperature of the water.
For its use in baths or showers.
Ref. 106900 thermostatic bath without equipment Ref. 105900 thermostatic bath with equipment. Finished chrome Ref. 131900 Thermostatic shower without equipment Ref. 130900 Thermostatic shower with equipment. Finished chrome.
It reduces the water consumption.
Finish: Chrome. Maximum detection range (cm): 13. Flow rate (l/min at 3 bar): 5.7. Flexible power supply included. Spout length (mm): 151. Aerator type: Coin slot. Installation type: Shelf.
Automatic drain, chain coupling, smooth structure, mezzo spout, high spout, swivel spout, recessed, XL handle, battery powered, power supply with network connection.
The maximum water volume admitted for each discharge is 6l. The cistern must incorporate an interruption device of short/long pulse discharge. Instructions regarding the operation of the device for interrupting the discharge or short/long pulse must be visible in the cistern. The average sum of the volume of a complete discharge and four reduced discharge must be less than or equal to 3.6 l. The tank will not exceed the value of the Lap sound pressure level, for a characteristic flow, of 20 dB (A), measured in accordance with UNE-EN ISO 3822, parts 1 and 4.
Toilet with a cistern that contains a double-discharge mechanism. The pressing of one or another button discharges 3 or 6l/min.
It reduces the water consumption.
Measures: 325 mm length, 335 mm width and 655 mm height.
It reduces the water consumption.
It is a mixertap for washbasins, showers, bidets and baths that includes an aerator. With inner or outer thread. It allows up to 50% of water saving without loss of comfort.
It reduces the water consumption.
It is a timed tap with a push button, adjustable, suitable for washbasins, showers, bathtubs and urinals.
Allows saving water.
Flow stabilizer. They keep the same flow regardless of the pressure of the water network and the opening of the tap.
Allows water saving.
Flow rate limiter for taps. It reduces water consumption to less than half.
Allows saving water.
Shower flow reducer that guarantees comfort in the use, a good operation of the boiler and a keeping the flow regardless of the water pressure.
The system allows saving between 30 and 40% of drinking water consumption.
Purifier that treats gray water through filters and chemical products to reuse them in the WC tanks. The filter retains solids, as well as remnants of tissues or hair. The chemical purification is carried out by adding a small dose of bleach or a product with active oxygen to the water. This product is stored in a small compartment of the treatment plant and is applied automatically through a metering pump, which operates about three minutes a day. The consumption of water in the toilets supposes a consumption of about 25l/person/day, reason why the water that is reused is sufficient to cover the demand.
Different models depending on whether they are intended for a single-family, multi-family or the tertiary sector and depending on the number of people.