Single-phase machine specially designed for the projection of acrylic mortars and special rehabilitation mortars. Machine equipped with a compressor depending on the material to be projected. Likewise, the flow can be regulated through the regulator that the machine has. Power supply: 230V 50HZ. Gearmotor pump: 1.1KW. Air compressor: 200 liters/minute. Material flow rate: from 2-18 liters/minute. Maximum projection distance: up to 25-30 depending on the material, advisable 15-20 m.

Product formulated specifically for the sealing of joints in ceramic floors and walls. The most important feature of this mortar is its ability to keep the white unalterable over time. Various additives are added to the product mixture, such as bactericides and fungicides that prevent the formation of germs, bacteria and fungi; waterproofing and water repellent mass that prevent the mortar to absorb dirty water, which is usually the cause of the degrade and aging of grout mortars. It also has additives that enhance the white color of the product. The joints to be filled must be clean. The old substrates, impurities and traces of badly adhered particles must be removed beforehand, in addition to the removal of fats, oils, etc. It should not be applied at temperatures below + 5ºC.

It is used for the grouting of ceramics with joint widths not exceeding 10 mm, vertical pavements and walls in kitchens, bathrooms, swimming pools, etc.